Interactive Monitoring Map 

Sawbones Bay

AMS 505

The Sawbones Bay Portable Air Monitoring Station measure Sulphur Dioxide (SO2), Hydrogen Sulphide (H2S), Total Hydrocarbons (THC), Nitrogen Dioxide (NO), Particulate Matter 2.5 (PM2.5), Ozone (O3), wind speed, wind direction, temperature and relative humidity.

WBEA uses Portable AMS's to measure air quality in locations where a permanent air monitoring station does not exist. Portable AMS's can be used for community monitoring, and background or baseline monitoring.

Current Location

The Portable AMS is currently Deployed at the MEG Energy Christina Lake Project.

Time of Data:
2017-11-22 14:00:00 (Mountain Standard Time)
ParameterHourly Average
SO2 2.09 ppb
H2S -0.08 ppb
THC 2.46 ppm
NO2 4.97 ppb
NOx 6.74 ppb
NO 1.77 ppb
PM2.5 n/d
Temperature -8.79 deg. C
Relative Humidity 67.55 %
Wind Speed @ 10m 5.69 km/h
Wind Dir @ 10m 224.80 deg

All air quality monitoring data displayed on this site by the Wood Buffalo Environmental Association is directly from monitoring equipment output signals. Displayed data is generally indicative of ambient conditions, however, it has not been reviewed, validated, nor processed for baseline drift and other fluctuations by qualified technicians. Final processed and validated data values may vary from values displayed on this site. A displayed value of 'n/d' indicates air monitoring data is not available at the corresponding time due to scheduled maintenance and/or instrument calibration. Charted data is locked to the range of the analyzer by default, and can be unlocked by the appropriate control. To access quality-checked and validated historical data, please visit the Alberta Government's airdata warehouse:

Historical Monitoring Data

PLEASE NOTE: When ambient concentrations of any pollutant WBEA measures exceeds the Alberta Ambient Air Quality Objective, WBEA has an immediate Reporting Protocol that is put into action. WBEA analyzers continuously monitor ambient air, and in the event of an exceedence the following steps are taken:

1 - The data collection system automatically sends out alarm notifications to WBEA personnel and an independent third party alarm monitoring company. 

2 - The alarm company acknowledges the incoming alarm and reports the data and supporting information such as wind conditions, locations, time, etc, to Alberta Environment & Parks (AEP) in real time, or as soon as becoming aware of it.

3 - AEP uses the data and information from WBEA to follow up as appropriate.